MAX6316LUK47CZ+T Overview
Power management is mounted through 5 terminals. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 225 for the package during reflow. The supervisor is always powered by a 1.2V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management belongs to the Power Management Circuits subcategory. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6316, which is the base power ics number. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate.
MAX6316LUK47CZ+T Features
Simple Reset/Power-On Reset type
MAX6316LUK47CZ+T Applications
There are a lot of Maxim Integrated MAX6316LUK47CZ+T Voltage Supervisors applications.
- Insulation fault location system
- Network equipment
- Analog circuit
- Automotive power systems
- Embedded computing
- Radar
- Digitally controlled LDO regulators circuit
- Battery cars
- Automotive permanent magnet synchronous motors
- Detection of phase loss
