MAX6315US28D3+T Overview
It is mounted through 4 terminals on the power management. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. There are TO-253-4, TO-253AA functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Manage ics operate at 3.6V supply voltages. IC management conducts in a 1-voltage supply. The power management is mounted by Surface Mount. A total of 4 pins are located on this power management. 4 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The supervisor's supply current is specified to 5μA. A similar IC managements number of the manufacturer can always be found by using MAX6315, the base power ics number.
MAX6315US28D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
5μA operating supply current
MAX6315US28D3+T Applications
There are a lot of Maxim Integrated MAX6315US28D3+T Voltage Supervisors applications.
- Set top box
- DSP
- Unattended substation automation
- Medical-specific insulation monitor
- Battery-powered equipment
- Automotive permanent magnet synchronous motors
- Fire equipment power monitoring system
- Efficient information transmission
- Refrigeration
- Battery cars
