MAX6313UK43D4-T Overview
As you can see, this power management is mounted through 5 terminals. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. Please refer to power management for SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 245. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during 0°C~70°C TA . Power management has an output of Push-Pull, Totem Pole during operation. There are other features such as RESET THRESHOLD VOLTAGE IS 4.3V to name a few. A similar IC managements number of the manufacturer can always be found by using MAX6313, the base power ics number. To be able to work, this power management requires 3/5V volts of power.
MAX6313UK43D4-T Features
Multi-Voltage Supervisor type
MAX6313UK43D4-T Applications
There are a lot of Maxim Integrated MAX6313UK43D4-T Voltage Supervisors applications.
- Important electronics for automotive safety
- Embedded computing
- Refrigeration
- Solar power charger
- DC stabilized power supply module
- FPGA design
- Sensitive sensors
- Automotive permanent magnet synchronous motors
- Digitally controlled LDO regulators circuit
- Automotive power systems
