MAX6310UK29D1-T Overview
There are 5 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 245. In a 2 supply voltage, the PMIC chip conducts. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. A similar IC managements number of the manufacturer can always be found by using MAX6310, the base power ics number. There is a requirement for 3/5V power to power this power management.
MAX6310UK29D1-T Features
Multi-Voltage Supervisor type
MAX6310UK29D1-T Applications
There are a lot of Maxim Integrated MAX6310UK29D1-T Voltage Supervisors applications.
- Utility meter
- Military electronics
- DSP
- Urban rail transit weak current power monitoring
- Detection of phase loss
- Network equipment
- Power communication system
- Digitally controlled LDO regulators circuit
- Automotive permanent magnet synchronous motors
- Fire equipment power monitoring system
