Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX6303EPA

MAX6303EPA

MAX6303EPA

Maxim Integrated

5V8 Terminals 8-Pin MAX6303 Voltage supervisor1 Channels Min 1.2V Max 5.5V

SOT-23

MAX6303EPA Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature-40°C~85°C TA
PackagingTube
Published 2010
JESD-609 Code e0
Pbfree Code no
Part StatusObsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Additional FeatureADJUSTABLE WATCHDOG TIMEOUT, PUSH-PULL OUTPUT
Subcategory Power Management Circuits
Max Power Dissipation727mW
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 245
Number of Functions 1
Supply Voltage 5V
Terminal Pitch2.54mm
Base Part Number MAX6303
Output Push-Pull, Totem Pole
Pin Count8
Number of Channels 1
Max Supply Voltage5.5V
Min Supply Voltage1.2V
Adjustable Threshold YES
Watchdog TimerYes
Reset Active Low
Voltage - Threshold Adjustable/Selectable
Number of Voltages Monitored1
Reset Timeout 2.8ms Minimum
Supply Current-Max (Isup) 0.007mA
Height Seated (Max) 4.572mm
Length 9.375mm
Width 7.62mm
Radiation HardeningNo
RoHS StatusNon-RoHS Compliant
In-Stock:4163 items

MAX6303EPA Product Details

MAX6303EPA Overview


There are 8 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tube. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 245. During operation, the power ic is supplied with a voltage of 5V. Power management conducts at a voltage of 1. Through Hole is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 8 pins on IC management. Power managment ic pin count is 8. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Through HoleThis power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. As well as this, there are other features to mention such as [0], for example. You can always use MAX6303, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6303EPA Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V

MAX6303EPA Applications


There are a lot of Maxim Integrated MAX6303EPA Voltage Supervisors applications.

  • Detection of phase imbalance
  • Embedded computing
  • Solar power charger
  • Important electronics for automotive safety
  • Insulation fault location system
  • Efficient information transmission
  • Leakage protection
  • DC stabilized power supply module
  • Multi-voltage system
  • Network equipment

Get Subscriber

Enter Your Email Address, Get the Latest News