MAX6302ESA+T Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. In a 5V supply voltage, the power management conducts. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 8 pins on the board. Pin count of the power management is 8. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.31V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. Additionally, there are many other features that can be found inside of the power management, such as [0].
MAX6302ESA+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.31V
MAX6302ESA+T Applications
There are a lot of Maxim Integrated MAX6302ESA+T Voltage Supervisors applications.
- Functional modules
- Unattended substation automation
- Electronics installed in the vehicle
- Dash board
- Sensitive sensors
- Battery-powered equipment
- Detection of phase imbalance
- Leakage current detection
- Leakage protection
- Medical-specific insulation monitor
