MAX5925AEUB+ Overview
In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package you will find it.Channel 1 is currently available.A Tube-shaped package holds it.The 10 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 10 pins.The supply voltage 5V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for General Purpose are available on the device.A feature of Fault Timeout, Latched Fault, UVLO describes it.Using a 1V~13.2VV power source should be able to power the device.The MAX5925 family includes it.Hot-swappable device has Circuit Breaker, Slew Rate, Turn On Voltage programmable features.Presently, there is a sufficient supply of 1.5mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.25V so that the device can function normally.The maximum supply current it requires to operate is 2.5mA.
MAX5925AEUB+ Features
The terminal position of 10
Features of Fault Timeout, Latched Fault, UVLO
Programmable features of Circuit Breaker, Slew Rate, Turn On Voltage
MAX5925AEUB+ Applications
There are a lot of Maxim Integrated
MAX5925AEUB+ hot swap controllers applications.
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
- Central office switching systems
