Name: MAX561CAI+T
Brand: Maxim Integrated
SKU: MAX561CAI+T
Price: 3.35000 USD
Availability: InStock

new-10%

MAX561CAI+T

Manufacturer part number:MAX561CAI+T

Manufacturer:Maxim Integrated

Description:28 TerminationsMAX561 Receivers4 Bits 4/5 Drivers/Receivers1 Functions

Case Package:SOT-23

Datasheet:MAX561CAI+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	28-SSOP (0.209, 5.30mm Width)
Surface Mount	YES
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
Published	1996
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Matte Tin (Sn)
Additional Feature	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS
HTS Code	8542.39.00.01
Subcategory	Line Driver or Receivers
Technology	CMOS
Voltage - Supply	3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	MAX561
Pin Count	28
JESD-30 Code	R-PDSO-G28
Qualification Status	Not Qualified
Power Supplies	3.3V
Supply Current-Max	8mA
Data Rate	116Kbps
Output Characteristics	3-STATE
Differential Output	NO
Output Polarity	INVERTED
Protocol	RS562
Input Characteristics	SCHMITT TRIGGER
Number of Drivers/Receivers	4/5
Driver Number of Bits	4
Receiver Number of Bits	5
Duplex	Full
Receiver Hysteresis	300mV
Interface Standard	EIA-562
Receive Delay-Max	10000 ns
Output Low Current-Max	0.0016A
Out Swing-Min	7.4 V
Height Seated (Max)	1.99mm
Length	10.2mm
Width	5.29mm
RoHS Status	ROHS3 Compliant

MAX561CAI+T Product Details

MAX561CAI+T Overview

The enhanced 28-SSOP (0.209, 5.30mm Width) package makes it an excellent LED driver.There is a Tape & Reel (TR) package for this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.You can place this wide receiver to any Surface Mount-type PCB or development board.This differential driver uses 3V~3.6V for power supply.As many as 4/5 receivers/drivers are eligible for use on this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.Driver ICs in this category can operate efficiently with a supply voltage range of 3.3V.In order to drive and receive signals from data, this wide receiver has 28 terminations integrated.In this package, you will find 28 market-standard pinouts for this transceiver.As the base part number MAX561 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.In terms of resolution, this ic receiver was capable of providing a 4-bit resolution.As a rule of thumb, this receiver is typically specified with a resolution of 5 bits.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.This driver IC is designed to operate from a 3.3V power supply.In addition, the optical transceiver module incorporates a EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS function that improves the overall stability and accuracy of the signal management.There should be enough current supplied to the VCC pin of the part, but not more than 8mA.