MAX542AEPD+ Overview
This package is included in the 14-DIP (0.300, 7.62mm) package and is available for purchase. In order to operate it, a voltage supply of 5V volts is required. An FPGA part from the Other Converters family. With a Through Hole connector, this FPGA module can be attached to the development board. It is recommended that the operating temperature be kept within the range -40°C~85°C while the machine is operating. A model of this FPGA is contained in Tube for the purpose of saving space. The total number of terminations is 14. For related parts, use its base part number MAX542. There is a 5V power supply that is required to operate it. A total of 14 pins are included in this device.
MAX542AEPD+ Features
14-DIP (0.300, 7.62mm) package
14 pin count
MAX542AEPD+ Applications
There are a lot of Maxim Integrated MAX542AEPD+ Digital to Analog Converters (DAC)?applications.
- Optical Networks
- Instrumentation
- Voltage Set Point Control
- Gain and offset adjustment
- Microprocessor Controlled Calibration
- Data Acquisition
- Portable battery-powered instruments
- General Purpose Trimming Adjustments
- Digitally controlled calibration
- Digital Offset & Gain Adjustment
