MAX525BCPP+ Overview
In the package 20-DIP (0.300, 7.62mm), this product is provided. It is powered from a supply voltage of 5V. An FPGA part from the Other Converters family. The Through Hole-slot connector on the FPGA module can be connected to the development board. It is recommended that the operating temperature be kept within the range 0°C~70°C while the machine is operating. As a space-saving measure, this FPGA model is contained within Tube. Total terminations are 20. Parts related to this part can be found using its base part number MAX525. In this case, there are 20 pins on the board. As long as this FPGA is mounted in Through Hole, it should be able to function as it should in terms of its specifications, as well as its capabilities. Its flexibility can be fully utili5Ved when operating with a 5V supply voltage. Power is supplied to the device by a 5V battery. This device has a pin count of 20 in it. There is a maximum supply voltage of 5.5V that is supported by this product. The minimal supply voltage required for it is 4.5V.
MAX525BCPP+ Features
20-DIP (0.300, 7.62mm) package
20 pin count
20 pins
MAX525BCPP+ Applications
There are a lot of Maxim Integrated MAX525BCPP+ Digital to Analog Converters (DAC)?applications.
- Automated Test Equipment
- Digital Audio Amplifiers
- Set Top Boxes
- Low Power Systems
- Closed-loop process control
- Basestations
- Instrumentation
- Low Cost I/O
- Digitally controlled calibration
- Direct Digital Waveform Generation
