MAX504EPD Overview
The package that contains this software is called 14-DIP (0.300, 7.62mm). In order to operate it, a voltage supply of 5V volts is required. Part of the Other Converters family, this FPGA part is a programmable gate array. By attaching the Through Hole connector, you can use this FPGA module with your development board. The operating temperature should be kept at -40°C~85°C when operating. In order to save space, this FPGA model has been contained in Tube. Total terminations are 14. You can find related parts by using the part number MAX504, which is its base part number. In this case, there are 14 pins on the board. Having stated that, if this FPGA is mounted in Through Hole, then it may be able to perform fantastically according to its specifications. It is powered by a 5/+-5V battery, which can be purchased separately. I am going to present you with a device that is equipped with 14 pins. It can take a maximum of 5.5V as the supply voltage. Using 4.5V as the minimum supply voltage, it can operate.
MAX504EPD Features
14-DIP (0.300, 7.62mm) package
14 pin count
14 pins
MAX504EPD Applications
There are a lot of Maxim Integrated MAX504EPD Digital to Analog Converters (DAC)?applications.
- Instrumentation:
- Digital Calibration
- Closed-loop process control
- Gain and offset adjustment
- Process control equipment
- RF signal generators, arbitrary waveform generators
- Digital Audio Amplifiers
- Microprocessor Controlled Calibration
- Function Generaion
- Set Top Boxes
