Name: MAX5022EPA
Brand: Maxim Integrated
SKU: MAX5022EPA
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2003
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Technology	BICMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	245
Terminal Pitch	2.54mm
Base Part Number	MAX5022
JESD-30 Code	R-PDIP-T8
Function	Step-Up/Step-Down
Number of Outputs	1
Output Type	Transistor Driver
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive, Isolation Capable
Output Current	250mA
Voltage - Supply (Vcc/Vdd)	11V~28V
Topology	Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	262kHz
Input Voltage (Max)	28V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Switcher Configuration	SINGLE
Max Frequency	290kHz
Max Duty Cycle	75 %
Height Seated (Max)	4.572mm
Length	9.375mm
Width	7.62mm
RoHS Status	ROHS3 Compliant

MAX5022EPA Product Details

MAX5022EPA Overview

Capsuled in the 8-DIP (0.300, 7.62mm) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tube enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 11V~28V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~85°C TA. Using this switching controller, it is possible to switch at 262kHz. A generalization of dc dc regulator can be made using Through Hole. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "MAX5022". A maximum voltage of 28V is accepted by the dc to dc regulator as an input voltage. In most cases, the dc dc regulator's output current is 250mA. This information should be noted when you begin working with the component. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 75 % during power-up and power-down. The Through Hole makes DC switcher suitable for most applications and prototypes. It is estimated that this dc regulatorhas a maximum frequency of 290kHz.