MAX5006ACUB+ Overview
The system supports a total of 1 outputs. In order to facilitate transportation, alternator regulator is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). We are ready to ship in Tube packages. There is a general voltage output of 3.3V from this power supply regulator. This Surface Mount mount is universal and can be easily adapted. There are a variety of applications for the v, including LDO (Linear), USB. In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C. The external regulator is designed to operate at a voltage of 4V~5.5V. Electronic components have 10 terminals. Unless otherwise stated, the pinout of the alternator regulator begins with 10pins. Search MAX5006 for more pin-to-pin solutions. The PCB or other board can be mounted using the Surface Mount on it. The power supply regulator has a pin count of 10. It is important to note that other Other Regulators in the industry, such as the voltage controller, also play a significant part. There should be a 150mA output from the external regulator at present. A voltage higher than 4Vis required for the input of this alternator regulator. A maximum current of 150mAis intended to be produced by the voltage regulator.
MAX5006ACUB+ Features
Widely used in LDO (Linear), USB applications
MAX5006ACUB+ Applications
There are a lot of Maxim Integrated MAX5006ACUB+ Specialized Voltage Regulators applications.
- Motherboard
- Mobile PC Regulator
- High-Speed Logic Families
- PC Dual Power Supply
- Car Navigation Systems
- Continuously Adjustable GaAsFET Bias
- Notebook and Subnotebook Computers
- Termination
- SDRAM Termination Voltage for DDR?2 / DDR?3
- PCS Phones
