MAX495CPA Overview
A 8-DIP (0.300, 7.62mm) case is used to package the op amp. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tube case. 8 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 200μV. This electronic component is recommended to be mounted using the mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. Using a supply current of 150μA , this buffer op amp will be able to operate. There should be no change in the voltage gain. On this buffer amplifier, there are 1 circuits. There are 1 channels on the operational amplifiers. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The temperature should not be lower than 0°C for operational amplifier ics to operate. You should not use op amp above 70°C . The operating supply voltage of the buffer op amp is rated at 3V. As a result, it is recommended that a power supply of 150μA be used with this electronic part. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 3V volts.
MAX495CPA Features
104dB voltage gain
Output Type: Rail-to-Rail
MAX495CPA Applications
There are a lot of Maxim Integrated MAX495CPA Instrumentational OP Amps applications.
- pH (acidity)
- Power generator
- Proportional operation circuits
- Addition operation circuits
- Car stereo
- High input resistance broadband
- Inverse/same-phase proportional circuit
- Automotive sensors
- Fission chambers
- Measurements of Wheatstone bridge
