Name: MAX4948EBA+T
Brand: Maxim Integrated
SKU: MAX4948EBA+T
Availability: InStock

new-10%

MAX4948EBA+T

Manufacturer part number:MAX4948EBA+T

Manufacturer:Maxim Integrated

Description:800ns, 800ns SPDT 5.5Ohm BOTTOM Analog Switches BREAK-BEFORE-MAKE MAX4948 25 Pins 3nA 3V 25-WFBGA, CSPBGA

Case Package:SOT-23

Datasheet:MAX4948EBA+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	25-WFBGA, CSPBGA
Number of Pins	25
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2007
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	25
ECCN Code	EAR99
Resistance	5.5Ohm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
HTS Code	8542.39.00.01
Subcategory	Multiplexer or Switches
Max Power Dissipation	976mW
Technology	CMOS
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	6
Supply Voltage	3V
Terminal Pitch	0.5mm
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	MAX4948
Output	SEPARATE OUTPUT
Pin Count	25
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Number of Channels	6
Number of Circuits	6
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	10μA
Max Supply Current	10μA
Turn On Delay Time	800 ns
Supply Type	Single
Turn-Off Delay Time	800 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	5.5Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	3nA
Channel Capacitance (CS(off), CD(off))	15pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	800ns, 800ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.8V~5.5V
Length	2.54mm
RoHS Status	ROHS3 Compliant

MAX4948EBA+T Product Details

MAX4948EBA+T Overview

As the electronic part is packed in 25-WFBGA, CSPBGA, international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. In total, 25 terminations have occurred. High-quality output is provided by the electronic component's 6 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. This electrical component is included in the 25 series of products. On the other hand, analog switches can be constructed using SPDT switching circuits. A total of 6 circuits make up this switch device. Try searching with MAX4948 if you're looking for variants. Internally, this switch multiplexer has a resistance of 5.5Ohm. The datasheets for the 25 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. Analogue multiplexer with a Single supply type that is cost-effective. 1.8V should be the lowest voltage fed to the electronic component. It would be sufficient to run this analogue multiplexer with 10μA current. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 10μA. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. A voltage of 5V can be used to operate the electronic component.