Name: MAX491CPD+
Brand: Maxim Integrated
SKU: MAX491CPD+
Price: 5.25000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Contact Plating	Tin
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Number of Pins	14
Weight	1.620005g
Operating Temperature	0°C~70°C
Packaging	Tube
Published	2004
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Type	Transceiver
Subcategory	Line Driver or Receivers
Technology	CMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	MAX491
Pin Count	14
Operating Supply Voltage	5V
Power Supplies	5V
Interface	RS-422, RS-485
Operating Supply Current	500μA
Supply Current-Max	0.5mA
Logic Function	Receiver, Transceiver
Data Rate	2.5Mbps
Output Characteristics	3-STATE
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Full
Receiver Hysteresis	70mV
Number of Transceivers	1
Simplex/Duplex	Full Duplex
Transmit Delay-Max	60 ns
Output Low Current-Max	0.004A
High Level Input Current-Max	0.000002A
Height	4.45mm
Length	19.43mm
Width	7.87mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX491CPD+ Product Details

MAX491CPD+ Overview

LED drivers with the enhanced 14-DIP (0.300, 7.62mm) package will be able to drive a variety of common LEDs with ease.Tube package is used to mount this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.PCB or development board with Through Hole-type connectors can accommodate this wide receiver.A differential driver like this uses 4.75V~5.25V of power.As many as 1/1 receivers/drivers are eligible for use on this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.An output voltage range of 5V is sufficient to run this line driver ic efficiently.For driving and receiving signals from data, this wide receiver has 14 terminations integrated.There are 14 pinouts available on this transceiver which are market standard.With the part number MAX491 identifying the product type, temperature, package, etc., you can search with it to see more variants.An enhanced power dissipation control driver IC featuring 14 pins.As a result of optical transceiver downsizing and high-density Through Hole mounting technologies, its package size has been greatly reduced.Using this ic receiver, you were able to achieve a resolution of 1 bits.As a general rule, this receiver has a resolution of 1 bits that is usually specified.There is a voltage supply of 5V required in order for this transceiver module to be operated.There is a subcategory called Line Driver or Receivers for this rf transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.ICs implement a total of 1 transceivers.Enough but no exceeding 0.5mA of input current should be supplied to the VCC pin of the ic receiver.With an input voltage of 500μA, this integrating circuit has the ability to drive LEDs with an output voltage of 500μA.