Name: MAX490ECSA+
Brand: Maxim Integrated
SKU: MAX490ECSA+
Price: 5.09000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	540.001716mg
Operating Temperature	0°C~70°C
Packaging	Tube
Published	1996
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Type	Transceiver
Terminal Finish	Matte Tin (Sn)
Subcategory	Line Driver or Receivers
Max Power Dissipation	471mW
Technology	CMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	MAX490
Pin Count	8
Output Voltage	3V
Operating Supply Voltage	5V
Power Supplies	5V
Voltage	5V
Interface	RS-422, RS-485
Operating Supply Current	300μA
Propagation Delay	60 ns
Supply Current-Max	0.5mA
Logic Function	Receiver, Transceiver
Data Rate	2.5Mbps
Output Characteristics	TOTEM-POLE
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Full
Receiver Hysteresis	70mV
Number of Transceivers	1
Simplex/Duplex	Full Duplex
Output Low Current-Max	0.004A
High Level Input Current-Max	0.000002A
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX490ECSA+ Product Details

MAX490ECSA+ Overview

Designed for common LEDs, this driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package.In the Tube package, this receiver is mounted.As a Transceiver can transceiver, this part has enabled many applications to be served.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver consumes 4.75V~5.25V for its power supplyAt any one time, this electronic part can have up to 1/1 eligible receivers/drivers.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.The pinouts for this transceiver are standardized to meet the needs of the market.As the base part number MAX490 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.The driver IC has improved power dissipation control.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.It was possible to achieve a 1-bit resolution through this ic receiver.This receiver is typically specified with a resolution of 1 bits. This transceiver module is designed to operate from an input voltage supply of 5V.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.It is designed so that it can be operated from a 5V power supply with this driver IC.There are 1 transceivers in total implemented by this IC.A sufficient amount of input current should be provided to the optical transceiver module's VCC pin, but not more than 0.5mA.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 300μA.3V is the voltage Wide receiver can deliver.