Name: MAX489ECPD+
Brand: Maxim Integrated
SKU: MAX489ECPD+
Price: 6.49000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Number of Pins	14
Weight	1.620005g
Operating Temperature	0°C~70°C
Packaging	Tube
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Type	Transceiver
Terminal Finish	Matte Tin (Sn)
Subcategory	Line Driver or Receivers
Max Power Dissipation	800mW
Technology	CMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	MAX489
Pin Count	14
Output Voltage	3V
Operating Supply Voltage	5V
Power Supplies	5V
Interface	RS-422, RS-485
Operating Supply Current	120μA
Propagation Delay	250 ns
Supply Current-Max	0.25mA
Logic Function	Receiver, Transceiver
Data Rate	250kbps
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Full
Receiver Hysteresis	70mV
Number of Transceivers	1
Receive Delay-Max	2000 ns
Simplex/Duplex	Full Duplex
Transmit Delay-Max	2000 ns
Output Low Current-Max	0.004A
High Level Input Current-Max	0.000002A
Height	4.45mm
Length	19.43mm
Width	7.87mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX489ECPD+ Product Details

MAX489ECPD+ Overview

Driver ICs with enhanced 14-DIP (0.300, 7.62mm) packages are excellent for driving LEDs with common characteristics.Tube package is used to mount this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.You can place this wide receiver to any Through Hole-type PCB or development board.With respect to the power supply, this differential driver uses 4.75V~5.25V.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.Driver ICs with a supply voltage range of 5V can operate efficiently.14 terminations are integrated into this wide receiver for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.As the base part number MAX489 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.Wide receiver with enhanced power dissipation control, 14-pin.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Through Hole mounting techniques.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.There is typically a resolution of 1 bits specified with this receiver.There is a voltage supply of 5V required in order for this transceiver module to be operated.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.The module isolated transceiver implements a total of 1 transceivers.The optical transceiver module's VCC pin should receive enough input current, but not more than 0.25mA.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 120μA.A voltage of 3V can be delivered by Wide receiver.