Name: MAX489CSD
Brand: Maxim Integrated
SKU: MAX489CSD
Price: 1.55000 USD
Availability: InStock

new-10%

MAX489CSD

Manufacturer part number:MAX489CSD

Manufacturer:Maxim Integrated

Description:14 TerminationsMAX489 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

Case Package:SOT-23

Datasheet:MAX489CSD Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Operating Temperature	0°C~70°C
Packaging	Tube
Published	2003
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	5A991.B.4
Type	Transceiver
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER
HTS Code	8542.39.00.01
Subcategory	Line Driver or Receivers
Technology	CMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	1.27mm
Reach Compliance Code	not_compliant
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	MAX489
Pin Count	14
JESD-30 Code	R-PDSO-G14
Qualification Status	Not Qualified
Power Supplies	5V
Supply Current-Max	0.25mA
Data Rate	250kbps
Output Characteristics	3-STATE
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Full
Receiver Hysteresis	70mV
Interface Standard	EIA-422; EIA-485
Receive Delay-Max	2000 ns
Transmit Delay-Max	2000 ns
Output Low Current-Max	0.004A
Out Swing-Min	1.5 V
High Level Input Current-Max	0.000001A
Height Seated (Max)	1.75mm
Length	8.65mm
Width	3.9mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX489CSD Product Details

MAX489CSD Overview

This LED driver IC features an enhanced 14-SOIC (0.154, 3.90mm Width) package for driving common LEDs.Tube package is used to mount this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.You can place this wide receiver to any Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 4.75V~5.25V.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.Integrated into this wide receiver are 14 terminations that are used for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.Since the base part number MAX489 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.In the case of this receiver, a resolution of 1 bits is typically specified.There is a subcategory called Line Driver or Receivers for this rf transceiver module.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.A 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER function is also included in this optical transceiver module, which improves stability and accuracy of signal management.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 0.25mA of input current.