Name: MAX488ECSA+
Brand: Maxim Integrated
SKU: MAX488ECSA+
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	540.001716mg
Operating Temperature	0°C~70°C
Packaging	Tube
Published	1996
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Transceiver
Subcategory	Line Driver or Receivers
Max Power Dissipation	471mW
Technology	CMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	MAX488
Pin Count	8
Output Voltage	3V
Operating Supply Voltage	5V
Power Supplies	5V
Interface	RS-422, RS-485
Operating Supply Current	120μA
Propagation Delay	250 ns
Supply Current-Max	0.25mA
Logic Function	Receiver, Transceiver
Data Rate	250kbps
Output Characteristics	TOTEM-POLE
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Full
Receiver Hysteresis	70mV
Number of Transceivers	1
ESD Protection	Yes
Receive Delay-Max	2000 ns
Simplex/Duplex	Full Duplex
Transmit Delay-Max	2000 ns
Output Low Current-Max	0.004A
High Level Input Current-Max	0.000002A
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX488ECSA+ Product Details

MAX488ECSA+ Overview

Driver ICs with enhanced 8-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.There is a Tube package for this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply requirements for this differential driver are 4.75V~5.25V.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.5V is the supply voltage range that this line driver ic can efficiently operate with.8 terminations are integrated into this wide receiver for driving and receiving signals from data.It is packaged with 8 pinouts that are market standard for this particular transceiver.With the part number MAX488 identifying the product type, temperature, package, etc., you can search with it to see more variants.A 8-pin driver IC with enhanced power dissipation control is featured here.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.As a general rule, this receiver has a resolution of 1 bits that is usually specified.There are two types of input voltage supply available for this IC, 5V.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.IC5V is a high performance driver IC designed to work with a 5V power supply.ICs implement a total of 1 transceivers.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 0.25mA of input current.With an input voltage of 120μA, this integrating circuit has the ability to drive LEDs with an output voltage of 120μA.Wide receiver provides the output voltage of 3V.