Name: MAX485EPA+
Brand: Maxim Integrated
SKU: MAX485EPA+
Price: 6.02000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Contact Plating	Tin
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	930.006106mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2010
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Transceiver
Subcategory	Line Driver or Receivers
Technology	CMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	MAX485
Pin Count	8
Operating Supply Voltage	5V
Power Supplies	5V
Interface	RS-422, RS-485
Operating Supply Current	500μA
Supply Current-Max	0.9mA
Data Rate	2.5Mbps
Output Characteristics	3-STATE
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Half
Receiver Hysteresis	70mV
Number of Transceivers	1
Receive Delay-Max	200 ns
Simplex/Duplex	Half Duplex
Transmit Delay-Max	60 ns
Output Low Current-Max	0.004A
Height	4.572mm
Length	9.91mm
Width	7.87mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX485EPA+ Product Details

MAX485EPA+ Overview

LED drivers with the enhanced 8-DIP (0.300, 7.62mm) package will be able to drive a variety of common LEDs with ease.The receiver is packaged in a Tube package.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.PCB or development board with Through Hole-type connectors can accommodate this wide receiver.With respect to the power supply, this differential driver uses 4.75V~5.25V.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.An operating voltage range of 5V is suitable for this line driver ic.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.ICs that are packaged with market standard pinouts are available on the market.This part number MAX485 can be used to search for more variants based on the product type, temperature, package, etc.The driver IC has improved power dissipation control.A combination of optical transceiver downsizing and high-density Through Hole mounting reduces the package size dramatically.It provided a 1-bit resolution capability with this ic receiver.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a voltage supply of 5V required in order for this transceiver module to be operated.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.There are 1 transceivers in total implemented by this IC.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 0.9mA.With an input voltage of 500μA, this integrating circuit has the ability to drive LEDs with an output voltage of 500μA.