Name: MAX485EESA+
Brand: Maxim Integrated
SKU: MAX485EESA+
Price: 6.21000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	540.001716mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2003
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Transceiver
Subcategory	Line Driver or Receivers
Max Power Dissipation	471mW
Technology	CMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	MAX485
Pin Count	8
Output Voltage	12.5V
Operating Supply Voltage	5V
Power Supplies	5V
Interface	RS-422, RS-485
Operating Supply Current	500μA
Output Current	250mA
Supply Current-Max	0.9mA
Data Rate	2.5Mbps
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Half
Receiver Hysteresis	70mV
Number of Transceivers	1
Receive Delay-Max	200 ns
Simplex/Duplex	Half Duplex
Transmit Delay-Max	60 ns
Output Low Current-Max	0.004A
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX485EESA+ Product Details

MAX485EESA+ Overview

Designed for common LEDs, this driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package.In the Tube package, this receiver is mounted.The Transceiver can transceiver type enables this part to be used in a wide range of applications.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.With respect to the power supply, this differential driver uses 4.75V~5.25V.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.Driver ICs with a supply voltage range of 5V can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.It is packaged with 8 pinouts that are market standard for this particular transceiver.You can search with MAX485 to get more variants of this part, since it identifies the product type, temperature, package, etc.It is a 8-pin driver IC with enhanced power dissipation controls.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.In the case of this receiver, a resolution of 1 bits is typically specified.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.There are 1 transceivers implemented in this module isolated transceiver.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 0.9mA.An input voltage of 500μA is recommended for this integrating circuit to be able to drive LEDs.Wide receiver provides the output voltage of 12.5V.With the help of this bluetooth transceiver, you will be able to provide an output current of 250mA.