Name: MAX485CSA+T
Brand: Maxim Integrated
SKU: MAX485CSA+T
Price: 3.92000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	142.994995mg
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Transceiver
Subcategory	Line Driver or Receivers
Technology	CMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	MAX485
Pin Count	8
Operating Supply Voltage	5V
Power Supplies	5V
Interface	RS-422, RS-485
Operating Supply Current	500μA
Supply Current-Max	0.9mA
Data Rate	2.5Mbps
Output Characteristics	3-STATE
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Half
Receiver Hysteresis	50mV
Number of Transceivers	1
Receive Delay-Max	200 ns
Simplex/Duplex	Half Duplex
Transmit Delay-Max	60 ns
Output Low Current-Max	0.004A
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX485CSA+T Product Details

MAX485CSA+T Overview

Due to the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.Tape & Reel (TR) package is used to mount this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.On any Surface Mount-type PCB or development board, you can install this wide receiver.Power supply for this differential driver is 4.75V~5.25V.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.Driver ICs with a supply voltage range of 5V can operate efficiently.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.It is packaged with 8 pinouts that are market standard for this particular transceiver.Since the base part number MAX485 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.8-pin driver IC with improved power dissipation control.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.This IC implements 1 transceivers overall.To power the ic receiver, sufficient current but not more than 0.9mA should be supplied to its VCC pin.Input voltage is set to a value of 500μA, and this integrating circuit is capable of driving LEDs with that voltage.