Name: MAX4782ETE+T
Brand: Maxim Integrated
SKU: MAX4782ETE+T
Price: 3.80000 USD
Availability: InStock

new-10%

MAX4782ETE+T

Manufacturer part number:MAX4782ETE+T

Manufacturer:Maxim Integrated

Description:25ns, 15ns SP4T 1Ohm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4782 16 Pins 2nA 1.8V 16-WFQFN Exposed Pad

Case Package:SOT-23

Datasheet:MAX4782ETE+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-WFQFN Exposed Pad
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	1Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	1.349W
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4782
Pin Count	16
Operating Supply Voltage	3V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	3.6V
Min Supply Voltage	1.6V
Operating Supply Current	1μA
Throw Configuration	SPST
Propagation Delay	25 ns
Turn On Delay Time	30 ns
Logic Function	Multiplexer
Supply Type	Single
Supply Current-Max (Isup)	0.001mA
Turn-Off Delay Time	20 ns
On-State Resistance (Max)	1Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	38pF 158pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	25ns, 15ns
Charge Injection	-110pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	15ns
Voltage - Supply, Single (V+)	1.6V~3.6V
Signal Current-Max	0.01A
Height Seated (Max)	0.8mm
Length	3mm
Width	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX4782ETE+T Product Details

MAX4782ETE+T Overview

The electrical component comes in 16-WFQFN Exposed Pad packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. A 4 channel electronic part produces high-quality output. An 1.8V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the electrical part body. A SP4T switching circuit is used for these analog switches. Circuits number 2 make up this analogue multiplexer. Use MAX4782 to search for variants of the digital switches. Analog switches have 1Ohm internal resistance. Please refer to the datasheets for 16 pins functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. The digital multiplexer has a low cost Single supply. There should be 1.6V voltage fed to the electrical part below 1.6V. This digital switch can be operated with a current of 1μA. Draining from a single voltage supply, this analog switch requires a voltage of 1.6V~3.6V. 3V operating voltages are supported by the electronic component.