Name: MAX4761ETX+
Brand: Maxim Integrated
SKU: MAX4761ETX+
Price: 10.56000 USD
Availability: InStock

new

MAX4761ETX+

Manufacturer part number:MAX4761ETX+

Manufacturer:Maxim Integrated

Description:140ns, 50ns SPDT 3.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4761 36 Pins 5nA 3V 36-WFQFN Exposed Pad

Case Package:SOT-23

Datasheet:MAX4761ETX+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	36-WFQFN Exposed Pad
Number of Pins	36
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	36
ECCN Code	EAR99
Resistance	3.5Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.105W
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	0.5mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	MAX4761
Output	SEPARATE OUTPUT
Pin Count	36
Operating Supply Voltage	5V
Number of Channels	4
Number of Circuits	8
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Analog IC - Other Type	DPDT
Operating Supply Current	1μA
Nominal Supply Current	12μA
Max Supply Current	1μA
Turn On Delay Time	50 ns
Supply Type	Single
Turn-Off Delay Time	140 ns
-3db Bandwidth	150MHz
On-State Resistance (Max)	3.5Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	100 dB
Current - Leakage (IS(off)) (Max)	5nA
Channel Capacitance (CS(off), CD(off))	25pF
On-state Resistance Match-Nom	0.2Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	140ns, 50ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-95dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.8V~5.5V
Length	6mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX4761ETX+ Product Details

MAX4761ETX+ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 36-WFQFN Exposed Pad. In order to provide high reliability, an advanced packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. There are 36 terminations totally. A high-quality output is provided by the electrical component's 4 channels. An 3V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 36 series. Circuits based on SPDT switching are used to construct these analog switch ics. Circuits number 8 make up this analogue multiplexer. Try searching for the analog switch ic with MAX4761 if you are looking for variants. It has an internal resistance of 3.5Ohm. Datasheets for 36 pin functions are available upon request. There is Multiplexer or Switches analog multiplexer like this in the world. Multiplexers should not be powered above 5.5V in normal situations. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended to use 1.8V as the lowest voltage for the electrical part. This multiplexer would work with 1μA current. Using a single voltage supply, this switch device consumes 1.8V~5.5V volts. Putting voltage greater than 1μA on the multiplexer may cause damage. A DPDT analog IC is integrated into the board. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating voltages range from 5V.