Name: MAX4701ETE+
Brand: Maxim Integrated
SKU: MAX4701ETE+
Price: 4.03000 USD
Availability: InStock

new-10%

MAX4701ETE+

Manufacturer part number:MAX4701ETE+

Manufacturer:Maxim Integrated

Description:35ns, 20ns DPDT 75Ohm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4701 16 Pins 500pA 3V 16-WFQFN Exposed Pad

Case Package:SOT-23

Datasheet:MAX4701ETE+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-WFQFN Exposed Pad
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	75Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.67W
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4701
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	3/5V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Turn On Delay Time	35 ns
Supply Type	Single
Turn-Off Delay Time	20 ns
-3db Bandwidth	250MHz
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	2:2
Off-state Isolation-Nom	76 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	8pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	DPDT
Switch Time (Ton, Toff) (Max)	35ns, 20ns
Charge Injection	0.5pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-79dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	45ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Height Seated (Max)	0.8mm
Length	3mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant

MAX4701ETE+ Product Details

MAX4701ETE+ Overview

Shipping overseas is convenient due to the electrical component's packing in 16-WFQFN Exposed Pad. This high-reliability packaging method uses advanced packaging methods Tube. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 2:2. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 16. A 2 channel electronic part produces high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. Into the electrical component body are injected 16 pins. Based on DPDT switching circuits, these analog multiplexers work. The multiplexer consists of 2 circuits. MAX4701 can be used to search for analog multiplexer variants. This digital multiplexer has 75Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. The analog switch ic is of the Single supply type and is cost-effective. 1.8V is the lowest voltage that should be fed to the electronic electronic part. 1μA current would be enough for this multiplexer to operate. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. Put voltage above 1μA on the multiplexer to cause damage. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.