Name: MAX4684EUB+T
Brand: Maxim Integrated
SKU: MAX4684EUB+T
Price: 4.88000 USD
Availability: InStock

new-10%

MAX4684EUB+T

Manufacturer part number:MAX4684EUB+T

Manufacturer:Maxim Integrated

Description:50ns, 30ns SPDT 800mOhm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4684 10 Pins 1nA 3V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:MAX4684EUB+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Contact Plating	Lead, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2001
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	500mOhm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	444mW
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4684
Pin Count	10
Power Supplies	3V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	40μA
Nominal Supply Current	40pA
Max Supply Current	200nA
Turn On Delay Time	60 ns
Supply Type	Single
Turn-Off Delay Time	40 ns
On-State Resistance (Max)	800mOhm
High Level Output Current	300mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	84pF 37pF
On-state Resistance Match-Nom	0.06Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	50ns, 30ns
Charge Injection	200pC
Channel-to-Channel Matching (ΔRon)	60m Ω
Crosstalk	-68dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.8V~5.5V
Height Seated (Max)	1.1mm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant

MAX4684EUB+T Product Details

MAX4684EUB+T Overview

The electronic component is convenient to ship overseas because it is packed in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 10. As a result of its 2 channels, this electronic component provides high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. A total of 10 pins are injected into the body of the electronic part. Based on SPDT switching circuits, these analog multiplexers work. The multiplexer consists of 2 circuits. Use MAX4684 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 500mOhm. Datasheets for functions of 10 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 1.8V should be applied to the electronic component. This multiplexer would work with 40μA current. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. If you put voltage higher than 200nA on the digital multiplexer, damage may occur.