MAX4668CPE+ Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. High reliability is provided by advanced packaging method Tube. A switch device like this is mounted in Through Hole. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature around 0°C~70°C TA extended. Total terminations are 16. The electronic part delivers high-quality output through its 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. Circuits based on SPST - NO switching are used to construct these analog switch ics. There are 2 circuits in this switch device. Search with MAX4668 if you are looking for analog multiplexer variants. An switch multiplexer with 2.5Ohm internal resistance has a value of 2.5Ohm. The functions of 16 pins can be found in the datasheets. Users should never supply a voltage higher than 20V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 4.5V voltage fed to the electrical part below 4.5V. If you put voltage higher than 500nA on the digital multiplexer, damage may occur. Despite this switch device's dual supply capability, its voltage should not exceed 20V. It is recommended that you attach at least 4.5V to your dual power supply.
MAX4668CPE+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4668CPE+ Applications
There are a lot of Maxim Integrated MAX4668CPE+ Analog Switches & Multiplexers ICs applications.
- Central office
- Fiber to the Home
- ISDN NT1/TA
- Intelligent PBX
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- PBXs
- Communication systems
- PCMCIA cards
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Avionics test equipment
