MAX4590CPE Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Through Hole is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around 0°C~70°C TA. Total terminations are 16. A 1 channel electronic part produces high-quality output. The electrical component body receives 16 pins. A SPST - NO switching circuit is used for these analog switches. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with MAX4590. A 1.25Ohm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users should never supply a voltage higher than 36V to a switch device. There should be 4.5V voltage fed to the electrical part below 4.5V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. You should attach at least 4.5V voltage if you are using dual power supply. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.
MAX4590CPE Features
1 Channels
Switch Circuit: SPST - NO
MAX4590CPE Applications
There are a lot of Maxim Integrated MAX4590CPE Analog Switches & Multiplexers ICs applications.
- SONET
- Intelligent PBX
- Remote wireless modules
- E1 Multiplexer
- Imaging
- SDH/SONET multiplexers
- Audio and video routing
- 65 V DACs
- SONET/SDH ADM
- PDAs
