MAX4558EPE Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Through Hole. Multiplexers and demultiplexers have the same number of circuits 8:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 16 terminations. High-quality output is provided by the electronic component's 8 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. The electronic part body is injected with 16 pins. The circuits in this analogue multiplexer number 1. Use MAX4558 to search for variants of the digital switches. This digital multiplexer has 160Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. Multiplexers should not be powered above 12V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. For this multiplexer to operate, 1μA current would be sufficient. There is no problem with using dual supply voltage, but it should not exceed 6V. If you are using a dual power supply, you should attach at least 2V. This electrical part is compatible with 9V operating voltages.
MAX4558EPE Features
8 Channels
1μA Supply Current
MAX4558EPE Applications
There are a lot of Maxim Integrated MAX4558EPE Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Digital Cross-Connects
- Isolation
- Microprocessor controlled systems
- Audio/video switches
- Video switching
- Industrial control systems
- Digital cross connects (DSX-1)
- Voice over IP/DSL – Integrated Access Devices, Smart
- Battery Powered Instruments
