Name: MAX4558CPE
Brand: Maxim Integrated
SKU: MAX4558CPE
Price: 4.50000 USD
Availability: InStock

new-10%

MAX4558CPE

Manufacturer part number:MAX4558CPE

Manufacturer:Maxim Integrated

Description:150ns, 120ns 160Ohm Analog Switches BREAK-BEFORE-MAKE MAX4558 16 Pins 1nA 5V 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:MAX4558CPE Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	16
Weight	1.627801g
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1999
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	160Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4558
Pin Count	16
Operating Supply Voltage	9V
Power Supplies	3/3.3/5V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	12V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Max Supply Current	1μA
Propagation Delay	150 ns
Turn On Delay Time	350 ns
Voltage - Supply, Single/Dual (±)	2V~12V ±2V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	2V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	96 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	2.5pF 10pF
On-state Resistance Match-Nom	2Ohm
Switch Time (Ton, Toff) (Max)	150ns, 120ns
Charge Injection	2.4pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-93dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Height	4.45mm
Length	19.43mm
Width	7.87mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

MAX4558CPE Product Details

MAX4558CPE Overview

Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have the same number of circuits 8:1. Around 0°C~70°C TA is the extended operating temperature. 16 terminations have been made so far. This electronic part offers high-quality output due to its 8 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 16 series. A total of 1 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with MAX4558. A 160Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 12V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. A low voltage of 2V should be applied to the electronic component. The analogue multiplexer may be damaged if voltage is greater than 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. A dual power supply should have at least 2V voltage attached. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. There is a voltage range of 9V operating voltages for the electrical part.