MAX4541CSA+ Overview
The electronic component is convenient to ship overseas because it is packed in a 8-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature extended to 0°C~70°C TA. In total, there are 8 terminations. Due to its 2 channels, the electrical component produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. As part of its design, the 8 series is equipped with this electronic component. These analog multiplexers are built based on SPST - NO switching circuits. Using the MAX4541 search parameter, you can discover variants of the switch. This digital multiplexer has 60Ohm internal resistance. Datasheets for 8 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 12V should not normally be supplied to the switches. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 2.7V. This digital switch can be operated with a current of 100pA. A voltage of 2.7V~12V is required to drain this analog switch from a single voltage supply. Put voltage above 1μA on the multiplexer to cause damage. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Operating voltages of 9V are compatible with the electrical part.
MAX4541CSA+ Features
2 Channels
Switch Circuit: SPST - NO
100pA Supply Current
MAX4541CSA+ Applications
There are a lot of Maxim Integrated MAX4541CSA+ Analog Switches & Multiplexers ICs applications.
- Microwave transmission systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Communication systems
- PBX interfaces
- DSUs
- Remote wireless modules
- RGB switches
- Audio and video routing
- Optical Applications
- Voice over IP/DSL – Integrated Access Devices, Smart
