Name: MAX4535EUD+T
Brand: Maxim Integrated
SKU: MAX4535EUD+T
Availability: InStock

new-10%

MAX4535EUD+T

Manufacturer part number:MAX4535EUD+T

Manufacturer:Maxim Integrated

Description:275ns, 200ns DPST - NO 400Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4535 14 Pins 500pA 15V 14-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:MAX4535EUD+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	MAX4535
Pin Count	14
JESD-30 Code	R-PDSO-G14
Qualification Status	Not Qualified
Number of Channels	2
Number of Circuits	2
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Voltage - Supply, Single/Dual (±)	9V~36V ±4.5V~20V
Supply Current-Max (Isup)	0.375mA
Neg Supply Voltage-Nom (Vsup)	-15V
On-State Resistance (Max)	400Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	5pF 4pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	DPST - NO
Switch Time (Ton, Toff) (Max)	275ns, 200ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-53dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.03A
Height Seated (Max)	1.1mm
Length	5mm
Width	4.4mm
RoHS Status	ROHS3 Compliant

MAX4535EUD+T Product Details

MAX4535EUD+T Overview

Presented in 14-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 2:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. There are 14 terminations totally. Due to its 2 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. This electronic part can be found in the 14 series. A DPST - NO switching circuit is used for these analog switches. The multiplexer consists of 2 circuits. Search with MAX4535 if you are looking for analog multiplexer variants. There is a standard Multiplexer or Switches analogue multiplexer here. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board.