Name: MAX4530EWP+T
Brand: Maxim Integrated
SKU: MAX4530EWP+T
Price: 2.42000 USD
Availability: InStock

new-10%

MAX4530EWP+T

Manufacturer part number:MAX4530EWP+T

Manufacturer:Maxim Integrated

Description:150ns, 100ns 75Ohm Analog Switches MAX4530 20 Pins 1nA 5V 20-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:MAX4530EWP+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.295, 7.50mm Width)
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2001
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Resistance	75Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	800mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	MAX4530
Pin Count	20
JESD-30 Code	R-PDSO-G20
Operating Supply Voltage	9V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	1μA
Propagation Delay	150 ns
Turn On Delay Time	350 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	2V~12V ±2V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	75Ohm
Min Dual Supply Voltage	2V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	3pF 15pF
On-state Resistance Match-Nom	1Ohm
Switch Time (Ton, Toff) (Max)	150ns, 100ns
Charge Injection	1.5pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-92dB @ 1MHz
Height Seated (Max)	2.65mm
Width	7.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4530EWP+T Product Details

MAX4530EWP+T Overview

Shipping overseas is convenient with the electronic component packed in 20-SOIC (0.295, 7.50mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 8:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 20. High-quality output is provided by the electronic component's 8 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electronic part body is injected with 20 pins. There are 1 circuits in this multiplexer. Try searching with MAX4530 if you're looking for variants. There is 75Ohm internal resistance in this digital multiplexer. A voltage higher than 12V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 2V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 1μA current would be sufficient. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 2V. 9V operating voltages are supported by the electronic component.