Name: MAX4508ESE+T
Brand: Maxim Integrated
SKU: MAX4508ESE+T
Price: 6.80000 USD
Availability: InStock

new-10%

MAX4508ESE+T

Manufacturer part number:MAX4508ESE+T

Manufacturer:Maxim Integrated

Description:275ns, 200ns 400Ohm Analog Switches BREAK-BEFORE-MAKE MAX4508 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:MAX4508ESE+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2008
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	400Ohm
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4508
Pin Count	16
Operating Supply Voltage	12V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	36V
Min Supply Voltage	9V
Operating Supply Current	1μA
Propagation Delay	350 ns
Turn On Delay Time	500 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	9V~36V ±4.5V~20V
Supply Type	Dual, Single
Supply Current-Max (Isup)	0.6mA
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	400Ohm
Min Dual Supply Voltage	4.5V
High Level Output Current	30mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	10pF 19pF
On-state Resistance Match-Nom	15Ohm
Switch Time (Ton, Toff) (Max)	275ns, 200ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	15 Ω (Max)
Crosstalk	-62dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	275ns
Switch-off Time-Max	200ns
Signal Current-Max	0.03A
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4508ESE+T Product Details

MAX4508ESE+T Overview

Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 8:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 8 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. There are 1 circuits in this multiplexer. Try searching with MAX4508 if you're looking for variants. There is 400Ohm internal resistance in this digital multiplexer. A voltage higher than 36V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 9V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 1μA current would be sufficient. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 4.5V. 12V operating voltages are supported by the electronic component.