MAX4480AXK+T Overview
An op amp of this type is a OPERATIONAL AMPLIFIER-type. The op amp is delivered to you in a Strip case. The number of terminations approaches 5. A total of 5 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 5 pins. There is an input offset voltage of 1mV for this buffer op amp. The buffer amplifier is capable of operating from a supply current of 50μA . You should keep the voltage gain at 110dB for the time being. 1 channels are available on the instrumentation amplifier. The temperature should not be lower than -40°C for operational amplifier ics to operate. You should only use instrumentation amplifier at temperatures that are no higher than 125°C. The instrumentation amplifier is packed in the form of TAPE AND REEL. With regard to the supply voltage, this electrical component is capable of working from under 5.5V. Keeping the linear amplifier's supply voltage above 2.5V is recommended.
MAX4480AXK+T Features
5 Pins
supply voltage of 5V
110dB voltage gain
MAX4480AXK+T Applications
There are a lot of Maxim Integrated MAX4480AXK+T Instrumentational OP Amps applications.
- High input resistance broadband
- Cinema or auditorium audio system
- Television
- Scintillation detectors
- Power generator
- Oscilloscopes
- Test equipment
- Power transmission
- Strain gauges
- Non-polarized electrodes
