MAX4338EUB-G05 Overview
It is packaged in an UMAX-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 10 terminations this year. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 10 pins. Op amp ic rates 600μV for input offset voltage. A supply current of 1.3mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 95dB. There are a total of 2 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. It is important to keep in mind that the power supply voltage of this electric component is below 5.5V, which is suitable. Keeping the linear amplifier's supply voltage above 2.7V is recommended.
MAX4338EUB-G05 Features
supply voltage of 5V
95dB voltage gain
MAX4338EUB-G05 Applications
There are a lot of Maxim Integrated
MAX4338EUB-G05 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
