MAX4038ETA+T Overview
An op amp ic of the OPERATIONAL AMPLIFIER type. The op amp is delivered to you in a Strip case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 3V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 200μV for this buffer op amp. As long as the supply current of the chip does not exceed 1.9μA, this op amp ic can operate. Keeping the voltage gain at 108dB is the best course of action. During the manufacturing process, this buffer amplifier is divided into 1 circuits. As far as the device is concerned, buffer amplifier has 2 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 85°C should be used. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 3.6V. A high supply voltage of more than 1.4V is recommended for the instrumentation amplifier's supply voltage.
MAX4038ETA+T Features
8 Pins
supply voltage of 3V
108dB voltage gain
MAX4038ETA+T Applications
There are a lot of Maxim Integrated
MAX4038ETA+T Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
