MAX400CPA+ Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. Buffer amps of this type are called General Purpose-types. There is a Tube case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 15V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. Op amp rates 10μV as input offset voltage. For this electrical component, the recommended mounting type is Through Hole, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. There should be no change in the voltage gain. The buffer amp consists of 1 circuits in total.
MAX400CPA+ Features
8 Pins
supply voltage of 15V
120dB voltage gain
MAX400CPA+ Applications
There are a lot of Maxim Integrated MAX400CPA+ Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Proportional counter tubes
- High speed sample
- Exponential operation circuits
- Radar
- MP3
- Scintillation detectors
- Micro signal measurement
- Ultrasound transducers
- ECG equipment
