Name: MAX396EWI
Brand: Maxim Integrated
SKU: MAX396EWI
Availability: InStock

new-10%

MAX396EWI

Manufacturer part number:MAX396EWI

Manufacturer:Maxim Integrated

Description:150ns, 150ns 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX396 28 Pins 100pA 5V 28-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:MAX396EWI Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-SOIC (0.295, 7.50mm Width)
Number of Pins	28
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1996
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Resistance	100Ohm
Max Power Dissipation	1W
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Number of Functions	1
Supply Voltage	5V
Base Part Number	MAX396
Pin Count	28
Operating Supply Voltage	15V
Number of Channels	16
Number of Circuits	1
Max Supply Voltage	16V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Propagation Delay	150 ns
Turn On Delay Time	500 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	2.7V~16V ±2.7V~8V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	400 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	3V
High Level Output Current	30mA
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF 80pF
On-state Resistance Match-Nom	1.8Ohm
Switch Time (Ton, Toff) (Max)	150ns, 150ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	1.8 Ω
Crosstalk	-92dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	250ns
Switch-off Time-Max	200ns
Signal Current-Max	0.03A
Height	2.35mm
Length	18.1mm
Width	7.6mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX396EWI Product Details

MAX396EWI Overview

Due to its 28-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tube. In Surface Mount, you'll find this switch device. There is 16:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 28. This electronic part offers high-quality output due to its 16 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. A total of 28 pins are injected into the electrical part body. There are 1 circuits in this switch device. Try searching for the analog switch ic with MAX396 if you are looking for variants. As far as internal resistance is concerned, it has 100Ohm. The datasheets for the 28 pins explain the functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16V. A cost-effective Dual, Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2.7V. It would be sufficient to run this analogue multiplexer with 1μA current. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. When using dual power supplies, you should attach at least 3V. The electronic component can function from 15V.