Name: MAX365ETE+
Brand: Maxim Integrated
SKU: MAX365ETE+
Availability: InStock

new-10%

MAX365ETE+

Manufacturer part number:MAX365ETE+

Manufacturer:Maxim Integrated

Description:250ns, 120ns SPST - NO 85Ohm QUAD Analog Switches MAX365 16 Pins 500pA 15V 16-WQFN Exposed Pad

Case Package:SOT-23

Datasheet:MAX365ETE+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-WQFN Exposed Pad
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1995
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	85Ohm
Terminal Finish	Tin (Sn)
Additional Feature	ALSO OPERATES WITH 10 V TO 30 V SINGLE SUPPLY
Max Power Dissipation	696mW
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.8mm
Base Part Number	MAX365
Pin Count	16
Operating Supply Voltage	20V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	24V
Min Supply Voltage	10.8V
Nominal Supply Current	100pA
Max Supply Current	100pA
Throw Configuration	SPST
Turn On Delay Time	250 ns
Voltage - Supply, Single/Dual (±)	10V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	120 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	85Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	4pF 4pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	250ns, 120ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-100dB @ 1MHz
Switch-off Time-Max	170ns
Height Seated (Max)	0.8mm
Length	5mm
Width	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX365ETE+ Product Details

MAX365ETE+ Overview

This electronic part is conveniently packaged in 16-WQFN Exposed Pad, making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. Operation at a temperature around -40°C~85°C TA. 16 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 16 series of products. Based on SPST - NO switching circuits, these analog multiplexers work. Circuits number 4 make up this analogue multiplexer. Look for analog switch ic variants by searching with MAX365. An switch multiplexer with 85Ohm internal resistance has a value of 85Ohm. Please refer to the datasheets for 16 pins functions. In a normalsituation, users should not supply the switches with voltage higher than 24V. A cost-effective Dual, Single supply type analogue multiplexer. 10.8V is the lowest voltage that should be fed to the electronic electronic part. If put voltage greater than 100pA on the device, damage may be caused to the analogue multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. You should attach at least 4.5V voltage if you are using dual power supply. The electrical part can be operated at 20V voltage levels. Don't miss this electronic component's additional features, such as: ALSO OPERATES WITH 10 V TO 30 V SINGLE SUPPLY.