Name: MAX355CWE+T
Brand: Maxim Integrated
SKU: MAX355CWE+T
Availability: InStock

new-10%

MAX355CWE+T

Manufacturer part number:MAX355CWE+T

Manufacturer:Maxim Integrated

Description:250ns, 200ns SP4T 350Ohm Analog Switches BREAK-BEFORE-MAKE MAX355 16 Pins 500pA 15V 16-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:MAX355CWE+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.295, 7.50mm Width)
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Published	1996
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	350Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	762mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Base Part Number	MAX355
Pin Count	16
JESD-30 Code	R-PDSO-G16
Operating Supply Voltage	28V
Power Supplies	+-15V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	4.5V
Operating Supply Current	300μA
Propagation Delay	250 ns
Turn On Delay Time	250 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	4.5V~36V ±4.5V~18V
Supply Type	Dual, Single
Supply Current-Max (Isup)	0.5mA
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	200 ns
Max Dual Supply Voltage	18V
On-State Resistance (Max)	350Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	100 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	1.6pF 5pF
On-state Resistance Match-Nom	7Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	250ns, 200ns
Charge Injection	80pC
Channel-to-Channel Matching (ΔRon)	7 Ω
Crosstalk	-92dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.03A
Length	10.3mm
Width	7.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX355CWE+T Product Details

MAX355CWE+T Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.295, 7.50mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around 0°C~70°C TA. The total number of terminations is 16. As a result of its 4 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. Based on SP4T switching circuits, these analog multiplexers work. The multiplexer consists of 2 circuits. Use MAX355 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 350Ohm. normally, users should not supply switches with voltages higher than 36V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 4.5V should be applied to the electronic component. This multiplexer would work with 300μA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. A dual power supply should have at least 4.5V voltage attached. A voltage of 28V can be used to operate the electronic component.