Name: MAX3490ECSA+
Brand: Maxim Integrated
SKU: MAX3490ECSA+
Price: 6.04000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	540.001716mg
Operating Temperature	0°C~70°C
Packaging	Tube
Published	1999
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Transceiver
Subcategory	Line Driver or Receivers
Max Power Dissipation	471mW
Technology	CMOS
Voltage - Supply	3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Base Part Number	MAX3490
Pin Count	8
Output Voltage	3V
Operating Supply Voltage	3.3V
Interface	RS-422, RS-485
Operating Supply Current	1.1mA
Output Current	20μA
Propagation Delay	62 ns
Supply Current-Max	2.2mA
Logic Function	Receiver, Transceiver
Data Rate	10Mbps
Differential Output	YES
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Full
Receiver Hysteresis	50mV
Number of Transceivers	1
ESD Protection	Yes
Receive Delay-Max	90 ns
Simplex/Duplex	Full Duplex
Transmit Delay-Max	35 ns
Output Low Current-Max	0.0025A
High Level Input Current-Max	0.000002A
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX3490ECSA+ Product Details

MAX3490ECSA+ Overview

LED drivers with the enhanced 8-SOIC (0.154, 3.90mm Width) package will be able to drive a variety of common LEDs with ease.The Tube package houses this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.On any Surface Mount-type PCB or development board, you can install this wide receiver.With respect to the power supply, this differential driver uses 3V~3.6V.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.A package consisting of 8 market standard pinouts is provided with this integrated circuit.This part number MAX3490 can be used to search for more variants based on the product type, temperature, package, etc.Wide receiver with enhanced power dissipation control, 8-pin.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.There is a capability of 1-bit resolution with this ic receiver.There is typically a resolution of 1 bits specified with this receiver.There are two types of input voltage supply available for this IC, 3.3V.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.There are 1 transceivers in total implemented by this IC.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 2.2mA.It is capable of driving LEDs with a voltage of 1.1mA as the input voltage to this integrating circuit.Wide receiver provides the output voltage of 3V.This bluetooth transceiver provides an output current of 20μA.