Name: MAX3483ESA+
Brand: Maxim Integrated
SKU: MAX3483ESA+
Price: 6.33000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	540.001716mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	1995
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Matte Tin (Sn)
Subcategory	Line Driver or Receivers
Max Power Dissipation	471mW
Technology	CMOS
Voltage - Supply	3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Base Part Number	MAX3483
Pin Count	8
Output Voltage	3V
Operating Supply Voltage	3.3V
Interface	RS-422, RS-485
Operating Supply Current	1.1mA
Output Current	20μA
Propagation Delay	75 ns
Supply Current-Max	2.2mA
Data Rate	250kbps
Output Characteristics	3-STATE
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Half
Receiver Hysteresis	50mV
Number of Transceivers	1
Simplex/Duplex	Half Duplex
Output Low Current-Max	0.0025A
Out Swing-Min	2 V
High Level Input Current-Max	0.000002A
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX3483ESA+ Product Details

MAX3483ESA+ Overview

This LED driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package for driving common LEDs.Tube package is used for this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.A Surface Mount-type PCB or development board can be used to place this wide receiver.A differential driver like this uses 3V~3.6V of power.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.3.3V is the supply voltage range that this line driver ic can efficiently operate with.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.MAX3483 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.Wide receiver with enhanced power dissipation control, 8-pin.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.This receiver is typically specified with a resolution of 1 bits. There are two types of input voltage supply available for this IC, 3.3V.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.This IC implements 1 transceivers overall.A sufficient amount of input current should be provided to the optical transceiver module's VCC pin, but not more than 2.2mA.With this integrating circuit you can drive LEDs of a voltage of up to 1.1mA. It can be used to drive large displays.There is a capabilWide receivery to deliver voltage at 3V wWide receiverh this device.In this bluetooth transceiver, we are able to get a maximum output current of 20μA.