Name: MAX3464ESA+
Brand: Maxim Integrated
SKU: MAX3464ESA+
Price: 11.64000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	540.001716mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2003
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Matte Tin (Sn)
Subcategory	Line Driver or Receivers
Max Power Dissipation	471mW
Technology	BICMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	MAX3464
Pin Count	8
Output Voltage	13V
Operating Supply Voltage	5V
Power Supplies	5V
Operating Supply Current	2.5mA
Output Current	250mA
Propagation Delay	20 ns
Supply Current-Max	4mA
Data Rate	20Mbps
Differential Output	YES
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Half
Receiver Hysteresis	50mV
Number of Transceivers	1
Simplex/Duplex	Half Duplex
Output Low Current-Max	0.004A
Length	4.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX3464ESA+ Product Details

MAX3464ESA+ Overview

Driver ICs with enhanced 8-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.This receiver is mounted in the Tube package.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.You can place this wide receiver to any Surface Mount-type PCB or development board.A power supply of 4.75V~5.25V is used by this differential driver.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.This line driver ic can operate efficiently with a supply voltage range of 5V.The integrated terminations of this wide receiver allow it to drive and receive signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.The base part number MAX3464 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An enhanced power dissipation control driver IC featuring 8 pins.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.This transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.Transceivers implemented by this IC total 1 in total.The VCC pin of the ic receiver should receive enough but not more than 4mA of input current.With an input voltage of 2.5mA, this integrating circuit has the ability to drive LEDs with an output voltage of 2.5mA.The device is capable of delivering voltage at the 13V axis.As a result of this bluetooth transceiver, its output current is 250mA.