Name: MAX336CWI
Brand: Maxim Integrated
SKU: MAX336CWI
Availability: InStock

new-10%

MAX336CWI

Manufacturer part number:MAX336CWI

Manufacturer:Maxim Integrated

Description:500ns, 500ns 400Ohm Analog Switches MAX336 28 Pins 20pA 28-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:MAX336CWI Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-SOIC (0.295, 7.50mm Width)
Number of Pins	28
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1997
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
ECCN Code	EAR99
Resistance	400Ohm
Max Power Dissipation	1W
Base Part Number	MAX336
Pin Count	28
Operating Supply Voltage	28V
Number of Circuits	1
Max Supply Voltage	30V
Min Supply Voltage	4.5V
Operating Supply Current	1μA
Propagation Delay	500 ns
Turn On Delay Time	600 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	4.5V~20V ±4.5V~20V
Supply Type	Dual, Single
Turn-Off Delay Time	500 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	400Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	16:1
Current - Leakage (IS(off)) (Max)	20pA
Channel Capacitance (CS(off), CD(off))	2pF 20pF
Switch Time (Ton, Toff) (Max)	500ns, 500ns
Charge Injection	3.5pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-86dB @ 100kHz
Height	2.35mm
Length	18.1mm
Width	7.6mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX336CWI Product Details

MAX336CWI Overview

Presented in 28-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, this analog switch is mounted. 16:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around 0°C~70°C TA. This electronic part can be found in the 28 series. A total of 1 circuits make up this switch device. Try searching for the analog switch ic with MAX336 if you are looking for variants. An switch multiplexer with 400Ohm internal resistance has a value of 400Ohm. To find out what the functions of 28 pins are, please refer to their datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. A analog switch ic that has a cost-effective Dual, Single supply type. A low voltage of 4.5V should be applied to the electronic component. The switch device would be able to operate with 1μA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. It is recommended that you attach at least 4.5V to your dual power supply. The electrical part can be operated at 28V voltage levels.