MAX335CNG+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 24-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around 0°C~70°C TA is the extended operating temperature. In total, there are 24 terminations. This electronic part offers high-quality output due to its 8 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. This electrical component is included in the 24 series of products. The analog switch ics are built using SPST - NO switching circuits. Search with MAX335 if you are looking for analog multiplexer variants. It has an internal resistance of 150Ohm. The functions of 24 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 20V volts for the multiplexer. Dual supply type digital switch with a low cost. 4.5V is the lowest voltage that should be fed to the electronic electronic part. A digital multiplexer may suffer damage if voltage is applied above 150μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. In the case of dual power supplies, you should connect at least 4.5V. There are SEPARATE OUTPUT outputs on this analog switch ic. The Drain to Source resistance of this electronic component is 150Ohm.
MAX335CNG+ Features
8 Channels
Switch Circuit: SPST - NO
Drain-to-Source resistance: 150Ohm
MAX335CNG+ Applications
There are a lot of Maxim Integrated
MAX335CNG+ Analog Switches & Multiplexers ICs applications.
- Isolation
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
