Name: MAX333AEWP+
Brand: Maxim Integrated
SKU: MAX333AEWP+
Price: 10.64000 USD
Availability: InStock

new

MAX333AEWP+

Manufacturer part number:MAX333AEWP+

Manufacturer:Maxim Integrated

Description:175ns, 145ns SPDT 45Ohm Analog Switches MAX333 20 Pins 250pA 15V 20-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:MAX333AEWP+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.295, 7.50mm Width)
Number of Pins	20
Weight	800.987426mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1999
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	35Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	800mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX333
Pin Count	20
Number of Channels	4
Max Supply Voltage	30V
Min Supply Voltage	10V
Operating Supply Current	1μA
Max Supply Current	250μA
Turn On Delay Time	175 ns
Voltage - Supply, Single/Dual (±)	10V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	4.5V
High Level Output Current	20mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	175ns, 145ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-78dB @ 1MHz
Height	2.35mm
Length	13mm
Width	7.6mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX333AEWP+ Product Details

MAX333AEWP+ Overview

Due to its 20-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 2:1. Operation at a temperature around -40°C~85°C TA. A total of 20 terminations have been recorded. The electronic part delivers high-quality output through its 4 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. Electronic part bodies are injected with 20 pins. SPDT switching circuits are used in these analog switch ics. MAX333 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 35Ohm. You can find the functions of the 20 pins in the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 30V. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 10V. The switch device would be able to operate with 1μA current. It may damage the digital multiplexer if the voltage is higher than 250μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. If you are using a dual power supply, you should attach at least 4.5V.