Name: MAX3291CPD+
Brand: Maxim Integrated
SKU: MAX3291CPD+
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Contact Plating	Tin
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Number of Pins	14
Operating Temperature	0°C~70°C
Packaging	Tube
Published	1999
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	TIN
Subcategory	Line Driver or Receivers
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	MAX3291
Pin Count	14
Operating Supply Voltage	5V
Power Supplies	5V
Nominal Supply Current	3mA
Logic Function	Receiver, Transceiver
Data Rate	10Mbps
Differential Output	YES
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Full
Receiver Hysteresis	35mV
Interface Standard	EIA-422; EIA-485
Number of Transceivers	1
ESD Protection	No
Receive Delay-Max	85 ns
Simplex/Duplex	Full Duplex
Transmit Delay-Max	65 ns
Output Low Current-Max	0.004A
Out Swing-Min	2.4 V
Height Seated (Max)	4.572mm
Width	7.62mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX3291CPD+ Product Details

MAX3291CPD+ Overview

This driver chip is excellent for driving common LEDs due to its enhanced 14-DIP (0.300, 7.62mm) package.Tube package is used for this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.Any Through Hole-type PCB or development board can be used with this wide receiver.This differential driver uses 4.75V~5.25V for power supply.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.5V is the supply voltage range that this line driver ic can efficiently operate with.In order to drive and receive signals from data, this wide receiver has 14 terminations integrated.As a standard package, this transceiver comes with a 14-pin layout that follows the market standard.Since the base part number MAX3291 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation driver IC with 14 pins.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Through Hole mounting techniques.It provided a 1-bit resolution capability with this ic receiver.There are typically 1 bits of resolution specified in the specifications of this receiver.An input voltage supply of 5V is required to operate the transceiver module.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.