MAX323CUA+ Overview
Presented in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of 0°C~70°C TA degrees Celsius. Totally, there are 8 terminations. The electronic part provides high-quality output because it has 1 channels. An 5V voltage supply should allow the electrical part to be turned on and run. A key feature of the 8 series is the inclusion of this electronic part as part of its design. Based on SPST - NO switching circuits, these analog multiplexers work. 2 circuits are used in this analogue multiplexer. Try searching with MAX323 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 60Ohm. The functions of 8 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 16V. A cost-effective Single supply type analogue multiplexer. It is recommended to use 2.7V as the lowest voltage for the electrical part. 1μA current would be enough for this multiplexer to operate. A voltage of 2.7V~16V is required for this switch device, which drains from a single voltage source. The switch multiplexer may be damaged if it is exposed to voltage greater than 100pA. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
MAX323CUA+ Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
MAX323CUA+ Applications
There are a lot of Maxim Integrated MAX323CUA+ Analog Switches & Multiplexers ICs applications.
- SONET
- Transmit
- CSU
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- SDH/SONET multiplexers
- Microprocessor controlled systems
- Audio and video switching
- PBXs
- E1 Multiplexer
- Precision data acquisition
